Made-to-measure sliding, swing and pedestrian gates in clearview mesh or palisade style, built to match your fence.
We pass your enquiry to one local fencing company. It costs you nothing.
A steel gate is the part of your boundary you use every day. Tell us what you need and we pass your enquiry to a local Pretoria installer, who measures up, quotes and fits a made-to-measure steel gate: a sliding driveway gate, a swing gate or a pedestrian gate.
Gates come up often in the enquiries this site receives. Of the 60 separate fencing enquiries sent to us between June and November 2026, 16 mentioned a gate. The same requests come up again and again: a gate that matches the new fence, a sliding driveway gate with a separate pedestrian gate beside it, and a motor fitted at the same time.
Most people want the gate to match the fence. A clearview gate uses the same 358 mesh as a clearview fence, so you can still see out, while a palisade-style gate uses vertical pales to match a palisade boundary. Say which fence the gate must match, and its colour, when you enquire.
Sliding gates suit most Pretoria driveways, provided there is enough straight wall or fence beside the opening for the gate to slide back. Swing gates suit short driveways or openings without that run-back space, and a pedestrian gate lets people walk in without opening the driveway gate. In the enquiries we receive, sliding gates are usually 3 to 4 metres wide and pedestrian gates about 1 metre.
If the gate will be motorised, the motor has to be rated for its weight. Centurion, a gate motor manufacturer, rates its D5-Evo for gates up to 500kg and its D10 Turbo for gates up to 1000kg, so a large, heavy gate may need a heavier motor. Mention the motor in the same enquiry and the installer can quote the gate and its gate motor installation together.
Gate prices depend on the opening, the infill and the motor, so this page does not quote them. For rough fence costs per metre, see the clearview fence price guide. Send us your measurements for a free, no-obligation site visit and written quote.
| Detail | Why it matters |
|---|---|
| Opening width and height | The gate is made to measure, so the size sets the quote |
| Sliding, swing or pedestrian | A sliding gate needs straight run-back space beside the opening |
| Infill to match: clearview mesh or palisade | Most people want the gate to match the fence |
| Colour | So the gate and the fence finish the same |
| Motor now, later or never | The motor must be rated for the gate's weight |
| Existing motor or tracks to re-use | Re-using parts can change what needs to be built |
What to expect from the installer, from the site visit to handover.
The installer measures the opening, checks the run-back space for a sliding gate, and notes the fence the gate must match.
A quote for the gate frame, infill, finish, track or hinges, and the motor if you want one.
The gate is made to size, then hung or set on its track and checked for smooth running.
Open and close the gate with the installer, check the locks or motor, and confirm any warranty in writing.
Want to learn more? Read about gate motor and intercom options on our blog.
Sources (read 19 November 2026)
Enquiries for steel gates are welcome from right across Pretoria and Centurion. Here are a few of the suburbs on this site.